Tube bundle cleaning just got a lot safer!

High Pressure cleaning of heat exchangers has never been this easy and safe!

Excellent cleaning results due to consistent speed and front and back cleaning. Moves the high-pressure hose by means of friction blocks fitted on chains. Weight is only 22 pounds. Pressure and lenght according to selection of hose. The XLTC Lance machine is most suitable for larger size hoses starting from 6/2 (DN6) or 1/4” up to 8/4 (DN8). Can also be used for UHP set up such as 4/6 up to 3000 bar (43500 PSI).

XLTC Basic setup with air supply unit (FRL)
XLTC Basic setup with air supply unit (FRL)

Air Motor

Quick change out motor Atlas Copco Twist Throttle (hand held)

Straight Guide Tube

700mm/27.6”, ø25mm/0.984”

Rear Protection Hose

700mm/27.6”, ø25mm/0.984”

1-XLTC unit

suitable for 3/2 - 8/4 hoses

Hose Catcher XL

Airfilter, Regulator, Lubricator (FRL)

Various options

The Xs-1 and the XLTC are suitable for a variation of setups and has different options. These are our most common options, but if you have specific question about your setup, then contact us through the information on this site in the footer.

Guide tubes straight XL + Bent XL

Guide tube straight xl 400mm/15.8” Gube tube bent XL 700mm/27.6”.

Hose reel with guiding hose and camlock couplings

Individual stackable hose reel. 1500 bar for hose size 3/2 - 8/2.

Pipe adapter cleaning conversion

Xs adapter kit complete with remote (excl. Hose and nozzle)
Suitable for flange diameters of 1/2” - 6 (152mm).
For pipes without a flange min. 3”(76mm) - 8” (203mm). Largest possible pipe diameter 250mm.

Anti withdrawal device

The anti withdrawal device will keep the front of the machine against the tube sheet to improve operator safety.


Technical SpecificationsEUUS
Min - Max air pressure3.0 Bar - 6.3 Bar45 psi - 95 psi
Air consumption180 liters per minute at max RPM (6,3 CFM)
Cleaning speed with standard air motorAt 3 Bar 45 cm/s

At 6.3 Bar 70 cm/s 
At 45 psi, 18" per second
At 95 psi, 30" per second
Cleaning speed with slow air motor (optional)At 3 Bar, 14 cm/s

At 6.3 Bar, 19 cm/s
At 45 psi, 5,5" per second
At 95 psi, 7,5" per second
Min - max flex lance outside diameter8 - 15 mm 314" - 590"
Max. pull / push strengthApprox 50 kg110 foot pounds
Hose Size (OD)3/2 - 8/43/2 - 8/4
WeightXLTC 10 kg21 pounds
Recommended nozzleNeutral configurationNeutral configuration


1 LTC & XLTC Single Lance Tube Cleaner1-ltc--xltc-single-lance-tube-cleaner.pdf
Lance Tube Cleanerscatalogus-lance-tube-cleaners-pe.pdf

For further information about prices or technical specifications please Contact us.